Step 1 – Shake

1. Shake the pen thoroughly for at least 60 seconds.
2. For the needle point pens – remove the clear lid with a firm pull. Unscrew the white collar to access the brush.
3. If there’s any doubt on colour match, test in a discreet area and let dry for 10 minutes – paints will often appear different in colour in the bottle, when wet or if applied incorrectly.

Step 2 – Prepare

1. The surface must be clean and dry - make sure all wax, polish and dust is removed.
2. If you have a deep scratch or chip OR if you can see metal or plastic we recommend using a primer first.
3. If rust is  present, we suggest a rust treatment as well.

Step 3 – Paint

1. Using either pen or fine brush apply thin, light coats in smooth strokes; if you’re using the needle point pen allow the nib to sit in the scratch or chip and squeeze gently.
2. Leave paint to dry for 10-25 minutes before applying a second coat if required. Leave paint to cure for 24 hours till hardened before applying lacquer or polishing.